HEY
VOLKS,
To add to my earlier =
instructions on
making your own guage cluster. I filled the void between the three =
pvc
"tubes" with 5-minute epoxy, but only after positioning some =
threaded
rod in the angled end for use as a mounting device. Then I drilled =
a hole
in the dash just to the left of the speaker perforation for a location =
for the
cluster.
I'll try to get a picture, =
or at least a
diagram for someone who want to attempt making one of these =
things. I did
it in a couple of nights, without too much trouble.
Mark Thoma