I understand where your coming from...I too had =
trouble
trying to figure out how to ground the AFM. If you look at the =
back of the
AFM, you'll see 2 bolt holes (un-used) in the housing (6mm???). =
Crimp a
"eye-loop" connector on your wire and find a metric bolt that =
will fit
in one of these bolt holes. At least, that's how I did =
it.
>Is running wire from the #4 =
pin(ground ) to
the block or alt. bracket acceptable?
Don't know, I was told to ground the AFM housing...
Karl Batzler
84 =
Vanagon
87 Audi 5000 S
La Quinta, CA
-----Original
Message-----
Installed my tantalum cap. on my =
AFM and was
wondering; I believe it was Karl that said to ground the AFM housing =
to the
block or alternator bracket but I found no easy way to attach a =
ground to
the metal part of the AFM. Is running wire from the #4 =
pin(ground ) to
the block or alt. bracket acceptable?
Many thanks
Dimwitted moose and Flying
Squirrel