Hi All,
I have an 84 Westy-4sp -1.9L = engine.  The water-hose bleeder's stem broke off right in front of = my house after a long trip to a remote area in Baja California.  = Talk about being lucky, since I did not have a spare one with = me.

Can any one advise the procedure of = how to install an air bleeder.  And if additional coolant is = needed, what is the coolant/water mixture? This is the plastic part = with an H shape mounted on the firewall in the engine = compartment.  All four ends of the H shape are connected to the = water coolant hoses.  The stem is located in the middle of the H = pattern and connected to a smaller hose.  And finally above the = stem is the thumb nut for some sort of adjustment.

Many thanks in advance.
Cheers!

Andrew Pham
Aurora Biosciences Corp.
11010 Torreyana Rd
San Diego, CA 92121
619-404-6614
619-404-6726 fax
phama@aurorabio.com