If the following quote =
is accurate,
why the big fuss over bleeding the
cooling system and danger to cylinder heads if you do =
not?
Thanks for =
replies
Steve E
quoting now from an earlier =
message:
John Doe, this is not a big deal when you lose only a small amount =
of
coolant.
First, you need to top up the coolant reservoir (LHS) - not =
to be
confused with
the expansion tan (CENTER behind license plate). You =
disconnect
the hose from
the cap, remove the cap, fill with antifreeze mixture =
to the
very top, replace
the cap, refasten the hose to the cap.
Next you =
need to
fill the expansion tank up to the MAX level. Now when you
drive, the =
coolant
light should be OFF. If it comes ON again, let the engine
cool down =
overnight
and repeat the entire process in the morning
In any case, keep an eye =
on the
expansion tank level and keep topping up to the
MAX level. =
Eventually,
the system will purge itself of any air.