I pulled the electical =
lead off the
sensor in my coolant reservoir for testing.
I then noticed there =
was 1/2 teaspoon of coolant pooled on the outside =
of
the tank around the sensor itself =
(which was still
in place in the tank). The
rubber boot of the lead had coolant up =
inside it, a
few drops even flowed out
when I turned the thing toward the
ground.
Lemme guess...... exposed coolant in =
this area
indicates a leak, right? It
isn't SUPPOSED to do that, =
right?
.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Steve
E
Lansing =
Michigan
84
Vanagon............................................. =
(when *will* it be a van
again?)