Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2000, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 6 Sep 2000 10:02:10 -0700
Reply-To:     Stuart MacMillan <macmillan@HOME.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <macmillan@HOME.COM>
Subject:      Re: Ill start from the beginning (longish)
Comments: To: Matthew Libby & Denise DeWolfe <matandded@netway.com>
Content-Type: text/plain; charset=us-ascii

Matthew Libby & Denise DeWolfe wrote: > > Can I drive the van 30+ miles to a mechanic without doing further > damage? > Well, if you have been following the list you know what happened to me when I pushed my engine too far! Chances are you can drive VERY slowly for the 30 miles without catastrophic failure, and this engine will most likely need a complete rebuild anyway. Disconnect the fuel injector wiring connector on #3 so gas won't be shot into the failed cylinder. If the power is as low as you say the other cylinders are probably in pretty poor shape too, number three runs the hottest and is usually just the first in line to go.

You do run the risk of throwing a rod however, and not having an engine to rebuild.

A better idea is to join AAA Plus and have them tow it for free! Choose your mechanic carefully and be prepared to fix it right, half a***d repairs won't last on these air cooled engines, they work much too hard in the heavy Vanagon campers and everything has to be perfect for a reasonable service life, as you can see. If you need a complete rebuild I would recommend an engine from a production rebuilder, such as are on the list, rather than having a local mechanic do the rebuild. Line mechanics, especially those in independent shops, just don't have the facilities or time to give this task proper attention. Just have them do the removal and installation, making sure all the cooling sheet metal, etc. is installed and working properly.

Keep in mind that if you like the camper and use it, it will be worth putting a new, reliable engine in it! If you are in doubt, sell it as is and move on.

-- Stuart MacMillan Seattle

'84 Vanagon Westfalia '65 MGB (Driven since 1969) '74 MGB GT (Restoring)

Assisting on Restoration: '72 MGB GT (Daughter's) '64 MGB (Son's)

Parts cars: '68 & '73 MGB, '67 MGB GT


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.