Afte buying mr. Wilfy's gas fumes fixit kit, I follow his website instructions and wonder if his van and mine arethe same vehicles. The problem I'm having is getting the cross piece barbs pushed back into the top of the gas tank(90GL). Tried with the tank up, the tank on the ground, and the rear of the tank dropped so I can access the holes from the back and still no luck. My factory cross piece was also clamped to the body at the top and with space being so tight up there, I don't see how I'm going to tighten the screw holding that clamp once I do get the barbs pushed back into the holes. One listee if memory serves, said they spent about 1/2 hour doing the repair, I'd like to know the short cut on this job!! My forearm size won't allow me the reach over the top to push them in, and access from the sides is apparently non-existent. Help! Dimwitted moose andFlying Squirrel
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.