Hi It's a good idea to change the front pads before they start eating into the disc and causing damage. Slipping in a new set is easy as pie. You'll probably need a metric 22 spanner and allen key socket (probably size 8), if you have the single piston type caliper. Changing pads, for the experienced, can take as little as about 10 minutes (or less!) per side. The problems that you may hit are: 1) rusted/seized bolts that refuse to budge 2) damaged discs that need machining or replacement 3) damaged caliper pistons/seals that require replacement. It's always a good idea to check those rear shoes as well and replace or adjust where necessary. Lastly, it's a dirty job. Good luck Nigel Cape Town,SA
>>>Hey, How hard is this? Should I do front and rear at the same time? My last inspection said the fronts are low, so I was thinking about changing them. Thanks. robyn
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.