Hi guys, I just pulled out my fuel filters, changed the big one, and I am looking with amazement at the smaller one, which the petrol passes through first after it leaves the tank. Now the whole rest of the run is 5/16" or 8mm I.D. (Which I have replaced), but for some strange reason , between the first filter and the pump, there is two inches of 10mm I.D. hose. So I have to spend tomorrow morning on my bicycle looking around the FLAPS like an idiot for a short length of 10mm fuel line. What where they thinking? Did the designers of the car all sit around laughing when they put that one in? Too bad I have metres of clear plastic hose the right diameter, but I'm too scared to use it as fuel line. Geoff Perth
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.