My fuel pump is not working. I have been troubleshooting: starting from the pump motor, then the relay and finally at the ECU connector. To make a long story short, when I jumper pins 3 and 13 on the ECU connector, the fuel pump runs, indicating that everything down the line is working properly. I have checked and cleaned all the connections on the ECU and connector and it still does not work. Should I blow the $ 600+ US on a new or rebuilt ECU, should I wire a switch under the dash to run the fuel pump or are there more tests I should do to figure out the problem? Thanks, Maurizio (Ottawa, Canada)
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.