Hi, I'm about to replace the brake fluid in my 86. I'm confused by reading Bentley. From what I gather, it says never to reduce the fluid level below the minimum mark. To follow the refill chart for each brake cylinder when bleeding the system. As a matter of interest what problem do you encounter draining the whole system? This would be the case if you were changing to silicon fluid. What is the equivalent measurement of 100 cm3. as is mentioned in the Bentley directions. 47.8A. I intend doing the procedure without the use of a pressure bleeder. Any tips gratefully accepted. Brian Kelly 86 GL Westfalia.
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.