In a message dated 09/17/2001 9:11:58 PM Central Daylight Time, dscrkjohns@JUNO.COM writes:
> I was checking my distributor, and the wires seem to be attached in the > wrong order. The book says order should be 1-4-3-2, mine is connected > either 1-2-4-3 or 1-3-4-2, depending on which way you go around the > distributor. So anyone know-should it be clockwise or counterclockwise? > > Thanks, > Sonia J > Hi, From the rear of the engine looking down. Rotor rotation, clockwise. Firing order 1. 4. 3. 2. If the distributor is set as the book, the dist. cap wires should be, Cylinder #1 top left. #2 bottom left #3 Bottom right. #4 top right. The only cross of wires is #3 and #4. If the engine is running well I'm sure you will find the above. Brian Kelly
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.