Date:         Mon, 16 Dec 2002 10:29:12 -0700
Reply-To:     Ben McCafferty <ben@VOLKSCAFE.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ben McCafferty <ben@VOLKSCAFE.COM>
Subject:      Re: Fridge help needed
Comments: To: Philip & Buffy Simmons <buffy-philip1@COX.NET>
In-Reply-To:  <000001c2a3dc$fd43d950$1aee0744@simmons>
Content-type: text/plain; charset="US-ASCII"

If mine was really cold, I would have to start it with the spark, then
slowly continue to pump the air pump to feed air until it was hot enough to
draw in air with convection.  You can watch the LED and when it fades, pump
some air and it will brighten again.  Continue this until it will stay lit
on its own.
tx,
bmc  :)

Ben McCafferty
ben@volkscafe.com


Volks Cafe
1823 Soquel Avenue
Santa Cruz, CA  95062
831-426-1244
http://www.volkscafe.com


> From: Philip & Buffy Simmons <buffy-philip1@COX.NET>
> Reply-To: Philip & Buffy Simmons <buffy-philip1@COX.NET>
> Date: Sat, 14 Dec 2002 17:55:00 -0800
> To: vanagon@GERRY.VANAGON.COM
> Subject: Fridge help needed
>
> Ok, I was emboldened by various websites to pull out my fridge and put a
> new fan in.  That went well and thought I got it back in ok, but I can
> no longer get it to run on propane.  I can get the pilot to light as I
> "puch the button" and push the "plunger" all the way in (to get spark).
> However, once the pilot lights, it will go out after approx 5-10 secs,
> regardless if I hold the button in, continue to push air pump, let
> button go.whatever.  It just will not stay lit.
>
> Any suggestions?
>
> Thanks!
>
> Phil