Date:         Wed, 28 Jun 2006 13:33:56 -0700
Reply-To:     andy highland <andy@420.AM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         andy highland <andy@420.AM>
Subject:      Re: dometic pilot goes out when thermostat turned up
Comments: To: Roger Sisler <rogersisler2000@YAHOO.COM>
In-Reply-To:  <vanagon%2006062811512272@GERRY.VANAGON.COM>
Content-Type: text/plain; charset=us-ascii

This is on a '90 where the layout is different:

A|B|C|D|E

A= pump
B= Pilot start button
C= Thermostat knob
D= Gas valve knob
E= Mode selector

Gas valve (D) open. Thermostat (C) set to 0: Pilot LED lights up. Turn
thermostat (C) higher (cooler) pilot goes out. I'm going to pull the fridge
out and investigate this week, hopefully.

Thanks,
andy

On Wed, Jun 28, 2006 at 11:49:18AM -0400, Roger Sisler wrote:
> Well, Duh. All this talk about a/c and dometics got me all excited.I went
> and actually opened up the door of my dometic. Guess what I found? That
> knob with the 0 and 1 that you are using to adjust you flame.It is the gas
> turn on valve. It either turns the gas on,or off.Thats all it does. The
> knob that you want is to the left.The thermistat knob.The mode switch is
> betweem the gas knob and thermistat knob.