Jeff I just got done pulling mine, redid the flaps replaced the motor and added sound insulation. I found the info on BTDT was about all I needed for pulling the dash. The only little confusing put I found was if you've got an early model vanagon. all 4 of the mounting screws for the heater box are on inside. The later model van the bottom two screws are on the outside by the headlights. <http://www.vanagonauts.com/Heater-Blower-R&- R118.htm> I think the vid your thinking about is Neil's from list <http:// web.mac.com/tubaneil> I posted some pictures on flicker <http://flickr.com/photos/adventurewagen/> JFF On Feb 28, 2008, at 6:42 PM, Jeff Clayman wrote: Anybody remember link to vanagon dash disassembly video to get to heater box? Jeff |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.