Date:         Thu, 28 Feb 2008 19:59:26 -0500
Reply-To:     Joe Federici <joefederici@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Joe Federici <joefederici@EARTHLINK.NET>
Subject:      Re: dash diassembly video
Comments: To: Jeff Clayman <jclayman@MASSMED.ORG>
In-Reply-To:  <001401c87a63$90738560$0201a8c0@stuart>
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

Jeff

I just got done pulling mine, redid the flaps replaced the motor and
added sound insulation.

I found the info on BTDT was about all I needed for pulling the dash.
The only little confusing put I found was if you've got an early
model vanagon. all 4 of the mounting screws for the heater box are on
inside. The later model van the bottom two screws are on the outside
by the headlights. <http://www.vanagonauts.com/Heater-Blower-R&-
R118.htm>

I think the vid your thinking about is Neil's from list <http://
web.mac.com/tubaneil>

I posted some pictures on flicker
<http://flickr.com/photos/adventurewagen/>

JFF

On Feb 28, 2008, at 6:42 PM, Jeff Clayman wrote:

Anybody remember link to vanagon dash disassembly video to get to
heater box?

Jeff