Date:         Fri, 13 Jun 2008 10:15:54 -0400
Reply-To:     Jonathan Poole <jfpoolio@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jonathan Poole <jfpoolio@GMAIL.COM>
Subject:      Re: Dometic flue, sealing
Content-Type: text/plain; charset=ISO-8859-1

I was able to fix my fridge blowing out problem by sealing the flue.  I
don't know which interface seal was the problem because I sealed them all,
body to rubber gasket, rubber gasket to plate, etc. etc. all the way out.  I
used a light coating of clear silicone so that it would be easy to remove
later if I wanted and you couldn't see any of the silicone so no worries
there.

Don't forget to seal your utility inlets if you haven't already.

Jonathan Poole

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.