Date:         Thu, 26 Mar 2009 18:36:52 -0500
Reply-To:     Max Wellhouse <dimwittedmoose@CFU.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Max Wellhouse <dimwittedmoose@CFU.NET>
Subject:      Re: Less expensive brand, was Re: Smaller Angle Grinder?
Comments: To: Jake de Villiers <crescentbeachguitar@GMAIL.COM>
In-Reply-To:  <71d9cdf90903261609g78cb50fg791a3bcba33ed265@mail.gmail.com >
Content-Type: text/plain; charset="us-ascii"; format=flowed

My Motto is "Buy the Best and Only Cry Once!!"

Sounds like Jake's motto too.

DM&FS

At 06:09 PM 3/26/2009, Jake de Villiers wrote:
>As a tradesman, I couldn't possibly recommend ANYTHING by Ryobi or Black &
>Decker.
>
>You get what you pay for.  Go with Porter-Cable, Rockwell, Bosch, Milwaukee
>or Makita.
>
>On Thu, Mar 26, 2009 at 3:05 PM, David Beierl <dbeierl@attglobal.net> wrote:
>
> > At 05:52 PM 3/26/2009, Someone wrote:
> >
> >> I have a Ryobi plate joiner from circa 1987 or so. I haven't used it
> >> in years but it was "okay".
> >>
> >
> > Okay, must have been a sample problem then.  I think I was already
> > wary of Ryobi and apparently leapt to a conclusion.  Thanks...
> >
> > d
> >
>
>
>
>--
>Jake
>
>1984 Vanagon GL
>1986 Westy Weekender "Dixie"
>
>Crescent Beach, BC
>
>www.crescentbeachguitar.com
>http://subyjake.googlepages.com/mydixiedarlin%27