Date: Tue, 2 Mar 2010 22:33:36 -0600
Reply-To: John Rodgers <inua@CHARTER.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: John Rodgers <inua@CHARTER.NET>
Subject: Re: Snap On 17mm 21mm trans wrench $1
In-Reply-To: <010501caba76$c1ce9910$456bcb30$@com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Why not take a cheaper 17-21 mm box end wrench and weld a bolt in the
end with a bold with a 17 mm head. Same function - just not quite so
elegant. - but then I use a double nutted 17mm bolt and a box end to fit
anyway.
John Rodgers
Clayartist and Moldmaker
88'GL VW Bus Driver
Chelsea, AL
Http://www.moldhaus.com
Daryl Christensen wrote:
> As far as I know..(and I have looked many times for another use, it being a
> 21 mm...
> It's for the very early split case tranny drain and fill plugs..
> Go figure they would still put an antique tool on one end of a perfectly
> good 17mm tool
>
> Daryl of AA Transaxle
> 425-788-4070
> "On the cutting edge of Old technology"
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
> Mike South
> Sent: Tuesday, March 02, 2010 9:49 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Snap On 17mm 21mm trans wrench $1
>
> I'll admit that I wasn't sure enough of this to post without getting a
> little backup from a google search in case I was making an utter fool of
> myself, but I think it's for turning the engine?
>
> mike
>
> On Tue, Mar 2, 2010 at 10:50 AM, Daryl Christensen
> <daryl@aatransaxle.com>wrote:
>
>
>> OK..smart guys...What is the 21 MM end of that wrench used for...
>> I know..
>>
>> Daryl of AA Transaxle
>> 425-788-4070
>> "On the cutting edge of Old technology"
>>
>>
>> -----Original Message-----
>> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
>> dylan
>> Sent: Tuesday, March 02, 2010 4:51 AM
>> To: vanagon@GERRY.VANAGON.COM
>> Subject: Re: Snap On 17mm 21mm trans wrench $1
>>
>> Yeap, my Snap On guy really likes me!
>> I usually get something for free each time he comes through.
>>
>> Just trying to have some fun with a $1 auction.
>> I have an unbelievable amount of watchers.
>>
>> dylan
>>
>>
>>
>>
>> ________________________________
>> From: Paul Gordon <paul_gordon@SYMPATICO.CA>
>> To: vanagon@GERRY.VANAGON.COM
>> Sent: Sun, February 28, 2010 1:32:55 PM
>> Subject: Re: Snap On 17mm 21mm trans wrench $1
>>
>> Some one must really like you, Those little suckers are $75.00 new Snapon
>> Part# S5902
>> ----- Original Message -----
>> From: "Alistair Bell" <albell@SHAW.CA>
>> To: <vanagon@GERRY.VANAGON.COM>
>> Sent: Sunday, February 28, 2010 10:39 AM
>> Subject: Re: Snap On 17mm 21mm trans wrench $1
>>
>>
>>
>>> I'll shill for dylan, its a nice wrench. Pic of mine here: http://
>>> www.members.shaw.ca/albell/wrench.html
>>>
>>> alistair
>>>
>>>
>>> On 28-Feb-10, at 6:57 AM, dylan wrote:
>>>
>>> http://tinyurl.com/snap-on-trans
>>>
>>> I was given a brand new one, so here is a VGC used one starting at $1.
>>> Never failed me on any plug, works like a charm.
>>>
>>> dylan
>>>
>>>
>
>
>
|