Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2011, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 2 Jul 2011 21:26:19 -0700
Reply-To:     Stacy Schneider <vwcrewman@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stacy Schneider <vwcrewman@GMAIL.COM>
Subject:      Re: Heater valve not closing?
Comments: To: Robert Stevens <mtbiker62@gmail.com>
In-Reply-To:  <69CF0765-C813-4838-A740-3916658103E5@gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

I have found a better solution to a cable controlled heater valve. Summit racing has a "Vintage Air" water valve which is electrically controlled. It has a rheostat type switch and a black box which can be hidden under dash. Except for the mounting hole and hooking up 2 wires ,it looks like it will slip right in place of the stock unit. While a little pricey at about $100.00 delivered ,If it stops the hot air flow in summer it may just be worth it. I am going to double check my factory hot air deflectors and be sure all stock parts are working first. Come the hot days of summer I may just step up to the plate and buy one. In my 85 I had installed a 2nd valve under the truck and just turned it off and on as the seasons changed and it worked as well. But having a permanent fix may just be worth it.

Stacy

On Sat, Jul 2, 2011 at 7:06 PM, Robert Stevens <mtbiker62@gmail.com> wrote:

> < > http://gerry.vanagon.com/cgi-bin/wa.exe?S2=vanagon&L=vanagon&q=heater+valve&s=heater+valve&f=&a=March+2005&b=30+September+09 > > > On Jul 2, 2011, at 7:52 PM, Gregory Smith wrote: > > > Hey gang, > > > > When fully closed, my heater valve still flows a little, enough to make > > the warmth uncomfortable as we finally head into summer here in the PNW. > > Is this by design, or does it mean the valve is faulty? I have already > > checked that the valve is closing fully, adjusting the wire sheath as > > needed. > > > > Thanks, > > Gregory Smith > > > > Smith Design Studio > > Small Building Company > > Olympia, WA > > 360-239-0429 > > gregoryfsmith.com >

-- 1989 Swedish Tristar with Aluminum gates and Atiwe 16" Wheels. Oldest son is an Eagle scout.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.