Date:         Sun, 13 May 2012 13:56:19 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: A FLAPS question?
Comments: To: ralph meyermann <ralphmeyermann@GMAIL.COM>
In-Reply-To:  <CAAj276xn-0Zsd1fCtUHAvPpu9DqYX-QaWSbGETQFi21JYg5i=w@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed

fwiw ..
I am a big big van of Van Cafe for vanagon parts.

I do believe they have a focus on providing higher quality parts.
it's getting better lately ..
for a while it seemed well made vanagon parts were getting hard to find.
I can get a heater valve for as low as 9 dollars or something..
that is scary cheap.   The one I got from Van Cafe was 3 times that much ..
but I bet it's a longer lasting far better part then the el cheapo.

On 5/13/2012 11:50 AM, ralph meyermann wrote:
> That's what I was planning on,Im needing struts for rear hatch,boots for
> steering rack and an alternator and maybe a starter too due to solenoid
> issues after the rebuild!
>
> Velma 82diesel 1.6 na westy
>
> On May 13, 2012 12:44 PM, "Chris S."<szpejankowski@gmail.com>  wrote:
>
> Iowa, yes, I remember. I passed through it to get to Minnesota, and boy,
> was I glad to get to Twin Cities. :-)
>
> With a bit of advanced planning you are probably better off to bundle your
> parts purchases and go with Bus Depot.
>
>
>
> Chris.
>
> Wysłane z iPhone'a
>
> Dnia May 13, 2012 o godz. 13:20 ralph meyermann<ralphmeyermann@gmail.com>
> napisał(a):
>
>> Im surrounded by a sea of corn here in IOWA for most vendors its about
> same distance!
>> Velma 82...