Date: Thu, 16 Aug 2012 11:13:09 -0700
Reply-To: Poppie Jagersand <poppie.jagersand@YAHOO.CA>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Poppie Jagersand <poppie.jagersand@YAHOO.CA>
Subject: Re: [Diesel-Vanagon] Oil temp gauges,
choices? Using water temp sender + gauge?
In-Reply-To: <1344879691.31769.YahooMailNeo@web163401.mail.gq1.yahoo.com>
Content-Type: text/plain; charset=iso-8859-1
Update to below:
Busdepot indeed has VDO gauges. I just had difficult to use the search feature on their new web page.
Fred, their customer rep, said tghe following pair would work, so I ordered that + some misc stuff I needed.
VDO Oil Temperature Gauge 310012 1 $24.95
Oil Temperature Sender 049919563A 1 $5.15
Shipping to Canada expensive, but more reasonable from BD than many other US sites.
I'll update on the gauge/sender accuracy when I receive it. (As I posted the generic FLAPS gauge/sender combo I bought showed 20F too low, so I decided not to use it)
Will take a trip to Waterton/Glacier NP this weekend.
Martin
________________________________
From: Poppie Jagersand <poppie.jagersand@yahoo.ca>
To: vanagon vanagon <vanagon@gerry.vanagon.com>; "diesel-vanagon@yahoogroups.com" <diesel-vanagon@yahoogroups.com>
Sent: Monday, August 13, 2012 11:41:31 AM
Subject: [Diesel-Vanagon] Oil temp gauges, choices? Using water temp sender + gauge?
Hi,
After the overheat issues with my 1.9TD Westy I wanted to install an oil temp gauge as a 2nd check on temp. I bought a "universal gauge and sender kit" from the FLAPS (Princess Auto), but the sensor thread was 1/8" - 27 thread and and VW wants 10x1 mm.
I found a post on vw vortex saying I can just use a temp sender :
http://forums.vwvortex.com/showthread.php?4747075-Want-to-install-oil-press-temp-gauge
What do you think about this?
Appealing for me because the temp sender I probably have among spare parts in the garage or it is listed at busdepot. (I searched for a oil temp gauge kit at BD bud didn't find one)
What I'm concerned is to get a temp sender that somehow has the wrong electrical properties. Are the sensors pretty much the same and it is just the gauges that vary? Or do I have to match the sensor to the gauge?
Tips for where I can buy a metric inexpensive kit in Canada would also be appreciated (ie Pricness auto, parts source, numper to pumper...). If I find the right kit I'll return the kit with the 1/8" sender and get a matched sender and gauge)
Martin (and '82 Westy 1.9TD)
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Diesel-Vanagon/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Diesel-Vanagon/join
(Yahoo! ID required)
<*> To change settings via email:
Diesel-Vanagon-digest@yahoogroups.com
Diesel-Vanagon-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Diesel-Vanagon-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|