Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 1998)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 28 Feb 1998 22:17:42 -0500
Reply-To:     Dennis Haynes <dhaynes57@EMAIL.MSN.COM>
Sender:       Vanagon Mailing List <Vanagon@vanagon.com>
From:         Dennis Haynes <dhaynes57@EMAIL.MSN.COM>
Subject:      Re: lifting the vanagon.(long)
Comments: To: Sudhir Desai <cdes@welchlink.welch.jhu.edu>,
          Vanagon Mailing List <vanagon@bigkitty.azaccess.com>

For starters, if you need this much modification, you should at least get a Syncro, but I think a Blazer or a Suburban is more appropriate.

Dennis -----Original Message----- From: Sudhir Desai <cdes@welchlink.welch.jhu.edu> To: Vanagon Mailing List <vanagon@bigkitty.azaccess.com> Date: Sunday, February 15, 1998 10:50 PM Subject: lifting the vanagon.(long)

>i am seriosly considering lifting my vanagon(2wd) because then i will be >able to use it for trail-running. > >i need some help listing all the parts i would need to modify/custom >fabricate. > >this is the list of what i have come up with so far: > > front suspension: > upper and lower a-arms need lengthening. > rework the shock and spring attachment points. > steering system? > ball joints? > rancho rs9000 remote adjust shocks > springs from synchro? or custom springs > > rear suspension & drivetrain: > lengthen and rework trailing arm. > move bracket forward for more articulation(would it work?) > lengthen axles, useing 6-states parts > beef up transaxle(how?) > rancho rs9000 remote adjust shocks > springs from sunchro? or custom > > engine: > put off-road kit onto carb > > brakes: > larger front disk > rear disk > > skidplating: > full underbody skidplating (from westy?) > > wheels: > alcoa 15x10 wheels > interco super swamper thornbird 35" tires > > wheel-wells: > cut them out and redo them to fit(wider > wells&fender flares) > > roll-cage: > 10point roll cage(inside of van) > > unibody braces/strengtheners: > beams crossing underneath the frame above the skidplating > (where to put them?) > >well that's all i can think of now, but if any y'all have any suggestions >other than gettting a synchro vanagon, i'd love to her them. > >Sudhir H. Desai 1984 VW Vanagon 3.4 liter Chevy V-6 >cdes@welchlink.welch.jhu.edu 1996 Subaru Outback 2.2 liter flat-4 >sudhir_desai@geocities.com 1997 Jeep Cherokee > >http://www.geocities.com/MotorCity/Speedway/1889 > >--------------------------------------------------------------------------- > To leave the list, send a SIGNOFF VANAGON message to > LISTSERV@VANAGON.COM > DIGEST and NOMAIL modes are disabled for the time being >--------------------------------------------------------------------------- > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.