Hi All, I have an 84 Westy-4sp -1.9L engine. The water-hose bleeder's stem broke off right in front of my house after a long trip to a remote area in Baja California. Talk about being lucky, since I did not have a spare one with me. Can any one advise the procedure of how to install an air bleeder. And if additional coolant is needed, what is the coolant/water mixture? This is the plastic part with an H shape mounted on the firewall in the engine compartment. All four ends of the H shape are connected to the water coolant hoses. The stem is located in the middle of the H pattern and connected to a smaller hose. And finally above the stem is the thumb nut for some sort of adjustment. Many thanks in advance. Cheers! Andrew Pham Aurora Biosciences Corp. 11010 Torreyana Rd San Diego, CA 92121 619-404-6614 619-404-6726 fax phama@aurorabio.com
[text/html]
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.