Date:         Thu, 2 Dec 1999 11:38:05 -0500
Reply-To:     Steve Elfelt <steveelf@SPRYNET.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steve Elfelt <steveelf@SPRYNET.COM>
Subject:      Re: no idle
Content-Type: multipart/alternative;

If the following quote is accurate, why the big fuss over bleeding the
cooling system and danger to cylinder heads if you do not?

Thanks for replies
Steve E



quoting now from an earlier message:

John Doe, this is not a big deal when you lose only a small amount of coolant.
First, you need to top up the coolant reservoir (LHS) - not to be confused with
the expansion tan (CENTER behind license plate). You disconnect the hose from
the cap, remove the cap, fill with antifreeze mixture to the very top, replace
the cap, refasten the hose to the cap.
Next you need to fill the expansion tank up to the MAX level. Now when you
drive, the coolant light should be OFF. If it comes ON again, let the engine
cool down overnight and repeat the entire process in the morning
In any case, keep an eye on the expansion tank level and keep topping up to the
MAX level.  Eventually, the system will purge itself of any air.




[text/html]